SN2400AB0 Tigris charging IC for iPhone 6s, 6s Plus, 7 and 7 Plus

Add to wishlistAdded to wishlistRemoved from wishlist 0
Advanced Soldering
Compatible with iPhone 6s, 6s Plus, 7, 7 Plus
Last updated on November 19, 2019 5:39 pm
Categories: , Tags: , ,

SN2400AB0 Tigris charging IC for iPhone 6s, 6s Plus, 7 and 7 Plus Repair

Compatibility

This part is compatible with iPhone 6s, 6s Plus, 7, 7 Plus and its Designation is U2101

Part Quality

This SN2400AB0 Tigris charging IC for iPhone 6s, 6s Plus, 7 and 7 Plus is rated Aftermarket due to aftermarket components and quality of them. Parts are more likely to be defective.

Repair

Advanced Soldering

This repair requires a Reballing Stencil.

Symptoms for Tristar USB logic and charging IC Replacement:

  • Could be caused by third-party charge Cables.
  • The Battery is draining qhickly.
  • The device is not Charging.
  • Computers do not recognize the device.
  • “Accessory Unsupported” message when using genuine iPhone Charger.
  • If the device screen is blue or red and is unresponsive.
  • The device is Bootlooping.
  • There is no voice coming from the device with the volume setting at max.
  • Some Accessories do not work
  • Error 9, 4005, 4013, 4014 Appears on itunes when attempting a Update/Restore.
  • The device has no signs of life at all.

Repairing SN2400AB0 Tigris charging IC for iPhone 6s, 6s Plus, 7 and 7 Plus:

  • Attempt replacing Dock and Battery. These could also be the cause of these issues.
  • Replace Tristar First.
  • Using a Tristar Tester you could identify if this part has failed.
  • During screen disassembly, try using 99% Isopropyl Alcohol to separate the adhesive on the top side of the screen or attempt to use a pick. Avoid pulling and twisting, ripping the display flex cables could cause touch loss, no image, and boot looping.
  • When disconnecting the cables Please avoid doing it from inside the board where you can hit different small components that can cause false battery reading, boot looping, among others.
  • If the Loud speaker does not have a proper connection with the pads on the dock, it will either have a low volume or not function. Dirt and dust could build up on the speaker and cause these same issues.
  • Check the connection between the dock and the board for any damage.
  • To do this, Repair, you require a soldering kit.
  • Soldering components requires a lot of heat, avoid heating or pushing components. Be very gentle; Heat should do most of the work when removing parts.
  • Make sure you disconnect all the cables and parts from the motherboard to avoid damaging them.
  • Look at steps ahead to avoid damaging the board.
  • Don’t Pull on the Chip. When it’s ready to come off, you’ll be able to take it off with tweezers gently.

iphone 7 plus not charging pp5v0usb missing bad tigris ic u2101

Plz Subscribe the phone wont charge missing 5v from usb how to find out, using free softwares.

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “SN2400AB0 Tigris charging IC for iPhone 6s, 6s Plus, 7 and 7 Plus”

Your email address will not be published. Required fields are marked *

Logo
Compare items
  • Total (0)
Compare